General Menu
General Description

Overview

Connection to GDK System

Installation

How to Program

Layout of Grid Panel

Menu

File

Edit

Admin

View

Help

GDK Admin Program

Numbering Plan (PGM 01)

Slot Assignment (PGM 02)

MSN Table (PGM 03)

Flexible DID Table (PGM 05)

ISDN - System Attribute (PGM 08)

COLP Table (PGM 09)

ISDN -  Station Attribute (PGM 23, 24)

ISDN - CO Attribute (PGM 37)

Emergency Service Table (PGM 06)

ICM Tenancy (PGM 16)

System Attribute 1 (PGM 40, 41, 42, 45, 46)

Exec-Sec Pairs

System Attribute 2 (PGM 50, 51, 52, 53)

Authorization Code (PGM 54)

System Attribute 3 (PGM 55, 56, 57, 58, 62, 63)

TIE Routing Table (PGM 65)

System Gain Control (PGM 66)

System Speed Zone (PGM 67)

Tone Cadency, Frequency (PGM 68, 69)

World Time Attribute (PGM 71)

World Time (PGM 72)

Voice Mail Dialing Table (PGM 73)

CO Line Name (PGM 74)

Ring Frequency (PGM 75, 76)

DCO TX Gain (PGM 77)

Digit Insert Table (PGM 78)

Custom Call Routing Table (PGM 79)

LCR - Day of Week (PGM 07)

LCR - Time of Day (PGM 07)

LCR - Leading Digit Table (PGM 07)

LCR - Digit Modification Table (PGM 07)

Station Attribute 1 (PGM 10, 11, 12, 13, 14, 16)

CO Group Access (PGM 15)

Internal Page Zone (PGM 17)

Station Attribute 2 (PGM 18, 19, 20, 21, 22, 28)

Button Programming (PGM 29)

CO Attribute 1 (PGM 30, 31)

CO Attribute 2 (PGM 33, 34, 35, 36, 38, 39)

Station Ring Type (PGM 32)

Station Ring Count (PGM 32)

Hunt Ring Assign (PGM 32)

Timer 1 (PGM 43)

Timer 2 (PGM 44)

Hunt Group Assignment (PGM 47)

Hunt Group Attribute (PGM 48)

Canned Toll Exception Table (PGM 64)

Toll Table (PGM 70)


Overview

GDK AdminPro is a PC based Window S/W for GDK administration and remote maintenance. GDK AdminPro supports off line feature. So, a user can program GDK administration without connection to GDK system. Note that the GDK AdminPro is only for off line mode. So, the GDK ADMIN takes charge of communication with GDK system. Please refer to [Figure 1]. This S/W aims to reduce the dependency between GDK S/W and PC S/W, and give to:

- Programming GDK Administration easily.

- Common interface on GDK Family (GDK-162, GDK-100, GDK -FPII)

The following figure is initial program running.

PC Requirement

- PC OS : Windows 95 or Windows 98

- PC Memory : Minimum 16M bytes (32 Mbytes or higher recommended)

- PC Free Disk Space : Minimum 20Mbytes (larger than 40 M Bytes recommended)

- PC Monitor Resolution : VGA or higher

Version Compatibility

GDK AdminPro supports currently GDK '99A series. But, it will also support '98 FEB version, in near feature.


Connection to GDK System

The GDK ADMIN Pro has no method to connect to GDK system. So, when a user wants to up/download ADMIN database to GDK system it is necessary to use GDK ADMIN. Mediation between GDK ADMIN and GDK ADMIN Pro is a user file, named "USR". User file is currently using GDK ADMIN and contains ADMIN database information. GDK ADMIN Pro makes or reads a user file. GDK ADMIN sends a user file to GDK system and receives a user file.


Installation

GDK AdminPro is distributed with 5 diskettes. The "GDK Admin Setup Diskette" makes actual GDK AdminPro Application environment which includes "Program Group" and "Start up directory (Folder)" .

To setup the GDK Admin, select "Setup" icon in this diskette 1.

The setup program works

- Make Program group "GDK PC Applications" and start up Folder which are user changeable options.

- Copy system DLL files ("MFC42.DLL", "MSVCRT.DLL",  "MSVCRT40.DLL", "SS30PP.DLL", etc).

- Launch the registration of OCX for grid control and DAO 3.5.

Note that the system DLL files are updated for existing system files with version compare. Also, "GDK AdminPro" supports "Uninstall" feature, which works to uninstall the "GDK AdminPro".

To uninstall the GDK AdminPro, choose Program Group "GDK AdminPro" and then choose "Uninstall".

The "Uninstall" feature removes installed "Program group" and "Startup Folder". It does not remove existing system DLL files.

File List in Program Directory

When you install GDK AdminPro successfully, following files reside in Startup directory.

ADMINPRO.EXE : Main Execution File

ADMINPRO.HLP : Window Help File

ADMINPRO.CNT : Window Help Content File

MFC42.DLL         : System DLL File

MSVCRT.DLL      : System DLL File

MSVCRT40.DLL  : System DLL File

SS30PP.DLL, SPR32X30.OCX, SPR32X30.DEP : Grid Control Files

DAO35REDIST.EXE : DAO 3.5 Redistribution File

CONFIG               : Directory Including Configuration Information (MDB files)


How To Program

There are two types to program GDK Admin. One is "Input Box" type, the other is "Combo Box" one.

You can program database using these two box just by selecting or editing.

For your understanding, refer to the following figure. You can see both "Input Box" and "Combo Box".


Grid Panel
Layout of Grid Panel

1. Grid Panel

Grid Panel is a combination of rows and columns.

Generally, rows represent order of Station, CO, BIN, and Flexible Button, etc. And, columns represent each field information.

Refer to the following figures. Columns represent a series of stations and rows are its attributes.

2. Title bar

Generally, Title bar indicates the name of program to be viewed onto current Grid Panel.

Initially, Title bar has nothing. But, if any program menu is selected, then its name is displayed at Title bar.

3. Status bar

Status bar is separated to three parts: Help of menu, System Information, and Key Indication.

System information includes the name of GDK system, Nationality, and Software version.


File

New

Open

Save

Save As

Export To Excel

Print

Print Preview

Print Setup

Recent File

Exit


New

This menu is for making a new database file of GDK system. You must select a system, version, and nation, then a new default database will be created.

(Currently not available)


Open

This menu is for opening an existed database file to download from GDK system. Usually, its extended name is "USR". Of course, if there is also an expanded file(named *.exp), this file will be opened together.

After selecting a file, system will analyze its system, version, and nation and finally be ready to program.


Save

This is menu for flushing some modified value in current grid control to database file to be opened.

If you don't have this menu after modifying some value, there will be no change for a user database file.

Please note that some fields to be modified only is flushed.


Save As

This menu is for saving an opened file as an another name. If there is a duplicated file, you can choice whether overwriting or canceling.

Please note that if current Grid panel is modified this feature will be done after saving.


Export To Excel

You can export your items in grid panel to Excel 97 format file. All information in current grid panel to be viewed is exported. But, please note that header is not exported.


Print

This menu is for printing all items in current grid panel. Also, according to size of row and column, it can automatically determine if the way of printing is normal or landscape mode.

Please note that this print feature supports only full range printing.


Print Preview

This menu is for previewing a layout to be printed

(Currently not available)


Print Setup

This menu is for setup for print. It is common interface of Windows 95 or 98.


Recent File

This menu is for opening one of recent files.

(Currently not available)


Exit

This menu is for exiting this program.


Edit

Undo

Copy

Cut

Paste

Move


Undo

This menu is for undoing previous command.

(Currently not available)


Copy

This menu is for copying some value in a row or column to clip board.

(Currently not available)


Cut

This menu is for cutting some value in a row or column. According to the characteristics of program field, one is deleted and the other is set to default.

 (Currently not available)


Paste

This menu is for pasting some value in a row or column from clipboard.

(Currently not available)


Move

This menu is for moving a current column to another column or columns according to user's input. When it is selected, you will see input range dialog box. Then, you input ranges (Station, CO, BIN, Hunt Group Number, Flexible Buttons, etc) that you want, and all items in current column are moved to destinations.


Admin

This menu is dynamically created after database is opened. Configuration information (including system, version, program, and field information) determines what Admin menu creates.

You can program GDK Administration according to your selection in this menu.

See the figure.


View

Toolbar

Status Bar


Toolbar

If this menu is checked, toolbar will be visible.


Status Bar

If this menu is checked, status bar will be visible.


Help

Help Topics

About AdminPro


Help Topics

You can see a help message using this menu.


About AdminPro

You can see information of this application.


Numbering Plan

Admin Feature is designed for change "Numbering Plan" or "Station Logical Number".

"Station Port Number" is as following:

   Port 0-191 (GDK162)

   Port 0-135  (GDK100)

   Port 0-77  (GDKFPII)

"Numbering Plans" are

   Station Group Pilot Number assignment

   SLT Program mode select Number

   Internal Page Zone Numbers

   Internal All Call Page Number

   Meet Me Page Number

   External Page Zone 1 Number

   External Page Zone 2 Number (Not on FPII)

   External All Call Page Number

   All Call Page Number

   SMDR Account code Enter Number

   Flash Command To CO Number

   SLT Last Speed Dial

   Do Not Disturb Number

   Call Forward Number

   Speed Dial Program Number

   Message Wait Enable Number

   Message Wait Return Number

   Speed Dial Access Number

   DND/FWD Cancel Number

   Call Park Location Numbers

   Alarm Reset Number

   Group Call Pick up Number

   Station DVU Number

   Night Answer

   Directed Call Pick-Up

   CO Group Access [01-48:GDK186 01-24:GDK100 01-09:FPII]

   CO Line Access [01-96:GDK186 01-48:GDK100 01-34:FPII)

   Tie Routing Access

   Retrieve Held CO Group

   Retrieve Held CO Line

   Access to Co Line in the 1st CO

   ICM Call To Attendant Station

   Print SMDR Station Base (ATD)

   Print SMDR Account Group Base (ATD)

   Delete SMDR Station Base (ATD)

   Delete SMDR Account Group Base

   Display Call Charge On LCD (ATD)

   Abort Printing SMDR (ATD)

   Door Phone Relay 1

   Door Phone Relay 2

   Door Phone Relay 3 (Not FPII)

   Door Phone Relay 4 (Not FPII)

   VM Message wait Enable

   VM Message Wait Cancel

   SLT COS Override

   Station UCD DND

   Station ISDN Flash


Slot Assignment

This menu consists of:

1. Station Slot

2. CO Slot

3. WTIB Port Number

4. No of Basic Primary Device : Range ( 0 - 30 )

5. No of Optional Primary Device (GDK 162 only) : Range ( 0 - 30 )

Note > In case of station and CO slot, you must program it in front order.


MSN Table

This Admin Feature is designed for MSN (Multiple Subscriber Number) Table.

The available BIN range depend on system as following:

   GDK186        : 001-128

   GDK100/FPII : 001-064

The Available values for each field are :

   CO Line Number : Capacity of system CO Line

   Bin Number : 000 - 999  (indicates index of flexible DID table)

   MSN Number ; 0 - 9

   Phone Number : maximum 20 digits

Note > This menu requires an expanded file (*.exp)


Flexible DID Table

In this feature, user can input Flexible DID Table.

Step 1. User can change bound index (000-299) with 3 digit

Step 2. CO Name Input (up to 11 max chars)

Step 3. Day Destination (Station/Hunt/DVU)

Step 4. Night Destination (Station/Hunt/DVU)

            DVU announce Number  (1-9)

Note : Make sure that GDK equipped MEMU ("*.EXP" file) and PGM 08 "DID conversion type" as '2'.


ISDN - System Attribute

These are ISND system attributes.

Available Attributes are

1.  In Zero Insertion (Yes/No), default is No

2.  My Area Code (Max 2 digit).

3.  CO Atd Code  (Max 5 digit)

4.  DID Conversion Type (0: according to PGM 55 / 1: according to PGM 01 /  2: according to PGM 05 )

5.  Calling Sub-Address (Yes/No), default is No

6.  Type Of Calling Number (Unknown/International/National/Networking/Subscriber), default is National

7.  Advice of Charge (None/AOC 1/AOC 2/AOC 3), default is None

8.  Out Zero Insertion (Yes/No), default is No

9.  Forced Page Index (00-xx), default is 0.

     where xx : 20 (GDK186) 15 (GDK100) 5 (GDK FPII)

10. u-law line is installed (Yes/No), default is No

11. ISDN Sending Mode (Overlap/Enblock), default is Overlap.

12. Enblock Inter Digit Timer (00-99), default is 15.

13. Prefix Code (2 digits)

14. International Access Code (4 digits)


COLP Table

Available bin No 1-10

Max digit in a bin no is 10


ISDN - Station Attribute

The menu supports as following:

   Sub Addressing Enable (No/Yes)

   Long / short configure (No/Yes)

   MSN  (No/Yes)

   CO ATD or EXT

   Progress Indicator

   CO Message Wait

   Station base CLIP

   Station base COLP

   Station base CPN

   Station base CLIR

   COLR

   CO Name BIN

   CLI Name Display

   Headset Ring

   COL Access with Dialing

   Keypad Facility


ISDN - CO Attribute

The available entries are

   COLP : input 2 digits

       00 : Not assign

       01-10: according to COLP table(PGM 09) bin no

       11 : according to Extension No

   DID RN : DID ignore digit No 2 digits

       00-99 (00 is default)


Emergency Service Table

User can input 10 bin no. Each bin no support max 5 digits.


ICM Tenancy

1. Group Attendant(STA No.)

2. Access Group No. in Sub menu

    Access Group is 1-5 (GDK common) and 6-10(GDK 162).

Note > ICM Tenancy Group assign is located in "Station Attribute I".


System Attribute 1

HOLD Preference (System/Exclusive)

Auto Privacy (Yes/No)

Privacy Warning Tone (Yes/No)

Page Warning Tone (Yes/No)

Off-Hook Ring Type (Mute/One Burst)

Multi-Line Conference (Yes/No)

System Speed Toll Check (Yes/No)    * Only on GDK186

Attendant Queuing (MOH/Ring back)

No. Of BGM Channel

Music On Hold Channel

ICM Box Music Channel

Music Source of Channel 1(INT/EXT) <- Not support in FPII

LCD Display Language

Caller ID Printing

Camp on Call RBT (or MOH)

SMDR Hidden (Not in GDK186)

External Night Ring (YES/NO)

Coline Aceess in CO Group (Round Robin/Last Choice)

Continuous Dial-Tone (Yes/No)

SLT RING Cadence (Yes/No)

Dial Tone Detection (Yes/No)

ACD Clear (Yes/No)

ACD Printing Base Timer (10sec/1Hour)


Exec-Sec Pairs

User can input Execute/Secretary pair. But, the linked pair (ie, 101->102, 102->103, 103->101) is not allowed.

These pairs depend on GDK system

   24 pairs : GDK162

   12 pairs : GDK100

   6 pairs  : FPII


System Attribute 2

Alarm Enable (Enable/Disable)

Alarm Mode (Alarm/Door-Bell)

Alarm Contact Type (Close/Open)

Alarm Signal Mode (Repeat/Once)

External Contact Type

External Contact Value

PBX Code Assign (MAX 5 digits)

SMDR Long Distance Code (MAX 5 digits)


Authorization Code

User can input Bin no

   001 - 600 (GDK 186)

   001 - 164 (GDK 100)

   001 - 110 (GDK  FPII)

In each entry, max 5 digit can be entered

When you input in ASCII, corresponding Numeric Data appears (ex: ABC ->"122223")


System Attribute 3

DID DIGIT CONVERSION - In this Program, User can program as following:

   Receive Count : 2-4 (3: default)

   Conversion      : allow 0-9, "#", "*" (default"#***")

   2nd Conversion: allow 0-9, (default "1234567890")

DID/DISA DESTINATION - In this Proram, User can program for incomming call

   Busy_destination

   Error_destination

PULSE DIAL SPEED RATIO - In this Proram, User can program

   10 PPS     60/40 %

   10 PPS     66/33 %

   20 PPS     60/40 %

   20 PPS     66/33 %

MODEM ASSIGN - This attribute is for MODU

   The available entries are

      Modem : use MODU as "modem" or "by pass"

      BAUD  : MODU baud rate. for MODU 2400bps fixed.

      Associate Device : Allow dumy station such as "STAxxx"  (2xxx within 5 dgt)

                                    or dedicated CO line (1xx with 3 dgt)

LCD DISPLAY MODE - The available entries are

   12/24 Hour

   DDMMYY/MMDDYY

SMDR Attribute I - The available entries are

   SMDR SAVE

   SMDR PRINT ENABLE

   LONG DISTANCE/ALL CALL RECORD

   PRINT INCOMING CALL

   RECORD IN DETAIL

   BAUD RATE  : Setting GDK SMDR baud rate

                      available Baud are

                      1:300 baud

                      2:600 baud

                      3:1200 baud

                      4:2400 baud

                      5:4800 baud

                      6:9600 baud

   SMDR CURRENCY UNIT  3 characters

SMDR Attribute II - This entry is for SMDR COST Unit change

  COST     : 6 digits

FRACTION : 1 digit


Tie Routing Table

TIE LINE ROUTING - This is TIE Routing table (CO Number)


System Gain Control

This feature can change System Gain control on "DKTU", "EKTU", "SLT", "COL", "DVU", "DTMF Receiver", "External Page", "MODU", "CPT rx level', "DCO(ISDN CO or CEPT)", "WTIB", and "R2 DCO".

Input Range : 00-63


System Speed Zone

User can device external page zone into 10 zone no. The available zone range is

   400-999 : GDK186

   300-399 : GDK100/FPII

Note that the overlapped zone range in zone number is not allowed. The Station range means allowed to access that speed zone and  the overlapped station range  in zone number is not allowed. The max station range depent on system.


Tone Cadency, Frequency

ACNR TONE CADENCE - Ring back tone, Busy tone, Error tone and secondary dial tone can be programmed for ACNR.

SYSTEM TONE FREQUENCY - Frequency, user entered (dial tone, ring back tone, error tone, busy tone), may change to the closest System frequency that provides.


World Time Attribute

1. Display World time or not

2. Temperature type (C/F)

3. ISD Code length : determine the length of ISD code

4. ISD code


World Time

This is world time attributes

   - Nation    : input within 3 digits

   - Area      : input within 4 digits

   - Time      : input time range [00-23], when restore to defalut press '00'

   - Temperature : Press desired Month with flex button, and then input 3 digits within 255 for average temperature.


Voice Mail Dialing Table

Input digits up to 12 digits.


CO Line Name

When an incoming CO line occurs, the name of CO line can be displayed on the LCD. Each CO line can be assigned any name group.

There are 10 (01-10) groups in system and CO line name (max. 12 characters). To input an entry in Admin such as "AAA12" input "AAA12". Only GDK Allowed ASCII can be supported.


Ring Frequency

RING FREQUENCY - Frequency for 4 differential ring may change to the closest ring frequency that provides.

DISTINCT RING FREQUENCY - Frequency for 4 differential ring may change to the closest ring frequency that provides.


DCO TX Gain

This feature can change DCO TX Gain to "DKTU", "EKTU", "SLT", "COL", "DVU", "DTMF Receiver", "CPT rx level', and "WTIB".


Digit Insert Table

Select desired bin no (1-5). In this feature, user can change

   Dialed Digit (max 2 digits)

   Inserted Digit (max 4 digits)

   CO Group  (2 digits up to max CO group number)


Custom Call Routing Table

This feature is designed for Customer call routing.

User can select [bin 1-9] on Button 1 to Button 10.

Each feature can be a

   1. Station Number

   2. Station Group

   3. DVU announce location: start with '\DND' and follows with 1 digit.

     (1-9)


LCR - Day of Week

[LCR mode]

   User can change "Disable/Override/Always" with 3-way toggle

[Day of Week Zone]

   User can divide a week into 3 zone

   Each day assigned into

    MON:1 TUE:2 WED:3 THR:4 FRI:5 SAT:6 SUN:7


LCR - Time of Day

With "Day of Week Zone", user can input TOD zone. User can select each TOD into 3 sub class.


LCR - Leading Digit Table

Input 1 is assigned to change Bin no (max 250)

Input 2 is LD mode (Both/Int/Col with 3 way toggle)

Input 3 is CD(Compared digits) upto 12 digits

Input 4 is Zone 1 (max 6 digits).

Input 5 is Zone 2 (max 6 digits).

Input 6 is Zone 3 (max 6 digits).


LCR - Digit Modification Table

Input 1 is assigned to change Bin no (max 100)

Input 2 is A(Added Digits) up to 16 digits

Input 3 is RP(Removal Position) (01-12)

Input 4 is RN(Removal Digit No) (00-12)

Input 5 is AP (Add Position)

Input 6 is C(CO Group)

Input 7 is ALT DMT Index[0-99(with MEMU)].


Station Attribute 1

DND ( Do-Not-Disturb )

Speed Dial Access

Page Access

Call Forward Access

PLA (Preferred Line Answer)

Auto Speaker Select

Warm Line

SMDR Dial Digit Hidden Display

CO Line Queuing

3-Minute Warning Tone

Override Priviledge

Automatic CO Hold(is Attendant?)

Data Line Security

Group Listening

Speaker-Phone/Headset

Howling Tone To SLT

Alarm/Door Bell Signaling

ICM Box Signaling

CO Individual Access

No Touch Answer

DVU Access

Voice over

Suppress Rx Data connected DM

Prepaid Call

STATION ID ASSIGN - consist of type and value

   Keyset

   DSS MAP 1                                : assigned station number

   DSS MAP 2 (Not on FPII)           : assigned station number

   DSS MAP 3 (Only on GDK186)  : assigned station number

   DSS MAP 4 (Only on GDK186)  : assigned station number

   DLS MAP 1                                 : assigned station number

   DLS MAP 2 (Only on GDK186)   : assigned station number

   ICM Box

   SLT (DTMF)

   SLT (Pulse)

   SLT with Message Wait (DTMF)

   SLT with Message Wait (Pulse)

   WTIB

Station COS(Day) : 1-7

Station COS(Night) : 1-7

ICM Tenancy Group Assign


CO Group Access

Select allowed/deny Group (with toggle)

Allowed group is

   Group 1-48 (GDK186)

   Group 1-24 (GGK100)

   Group 1-9   (GDK FPII)


Internal Page Zone

Internal Page Zone Access.


Station Attribute 2

CALL FORWARD PRESET - Input Forward preset number (Station or Hunt)

IDLE LINE SELECTION - Choose one of the followings:

   Flex Button

   CO Line Number

   CO Group Number

   Station Number

SMDR ACCOUNT GROUP

DID Ring

ACD Warning Tone

CO Button Program Enable

ADMIN Program Enable

UCD Service

Differential Ring

CO Call Drop Timer Enable

CTI Mode      (1:InActive 2:CTI_MODE 3:AT_MODE)

CTI Baud      (1:1200 2:2400 3:4800)


Button Programming

Consists of two parts: type and value

Type is one of Empty, CO Line, CO Group, Loop, program feature, Speed, etc.

Value is associated one of each type.


CO Attribute 1

CO Line Group Assign

Coline COS

CO Line Group Account

DISA: for DISA input "03",

          for DVU announce "02"

          default is "00"

DISA Account Code

COL Name Bin No.:    00 is not assign

CO/PABX

DTMF/Pulse

Universal Night Answer(UNA)

Flash type(Ground/LOOP)

Metering Type (No:0,50Hz:1,12k:2,16k:3,S-pol:4,p-pol:5)

Voice/Data For CEPT(is VOICE?)

Line Drop using CPT

Incomming call Night DVU


CO Attribute 2

FLASH TIMER - The available range is 00-30 (100msec unit)

OPEN LOOP DETECT - The available range is 00-20 (100msec unit)

CO/TIE LINE ASSIGN - The available entries are

   Normal Ring

   Ring/Down

   Loop/Dial

   Ear/Mouth Continuous

   Polarity Reverse

   Ear/Mouth Discontinuous

   DID Line For Digital CO Line

DID LINE ASSIGN - The available entries are

   Immediate Start

   Wink Start

   Delayed Dial Start

   Note that it is not available in GDK FPII

RING(0-4)

MOH(0-4)

Dial Tone

In Signal : 0:Pulse 1:DTMF (Only GDK 186)

Out Signal: 0:Pluse 1:DTMF (Only GDK 186)

B  Signal : 0:Charge 1:Free 2-9: Option (Only GDK 186)


Station Ring Type

You can choose one of as following lists:

    Not assign

    Day

    Night

    Both

    On Demand


Station Ring Count

You can choose one of 0-9


Hunt Ring Assign

You can choose one of as following lists:

    Not assign

    Day

    Night

    Both

    On Demand


Timer 1

Exclusive Hold Recall Timer

System Hold Recall Timer

Transfer Recall Timer

I-Hold Recall Timer

ATD Recall Timer

CO Ring Detect Timer

Pause Timer

CO Release Guard Timer

CO Warning Tone Timer

CO Dial Delay Timer

Call Park Timer

Preset Call Forward Timer

Unsupervised Conference Timer

ACNR Retrial Pause Timer

ACNR Retrial Delay Timer

Flexible DID Time out

ACNR No Answer Timer

ACNR Retry Counter

Warm Line Timer

PBX Code Print

Prepaid Call Warning Tone Timer

DISA Retry Counter

COS on DISA seize COL

DVU Forward Answer

R2 Manage Timer(GDK186 Only)

R2 Pulse Timer(GDK186 Only)

DT Delay Timer(GDK186 Only)

ACNR No Tone Retry Counter

Switch Pause Timer

Override 1st CO Group(Yes/No)


Timer2

MSG Wait Reminder Tone Time

Hook Switch Flash Timer

Hook Switch Bounce Timer

DID/DISA No Answer Timer

ICM Box Timer

Door Open Timer

Call FWD No Answer Timer

Dial Tone Timer

Inter Digit Timer

Automatic Release Timer.

Paging Timeout Timer

Ring Stop Detection Timer

Wink Timer

Minimum Hook Flash Timer

SMDR Timer

DVU User Record Timer

CO Digit Analysis Counter

ACD Print Timer

Ring Phase Timer

CAMP-ON Recall Timer

Station Auto Release Timer

DCOB TYPE

DCOB Ready Timer(Only GDK186)

Erase Wakeup Ring


Hunt Group Assign

In this menu user can select Station Group type and Input member. The Station Group types are

   Circular

   Terminal

   UCD

   VM

   Ring

   Pickup : Pickup can be any combionation with above

Max Hunt members are depend on system

   64 : GDK186

   32 : GDK100 /FPII


Hunt Group Attribute

If PGM 47 is already programmed, user can program this entry. This menu is divided into as following

[Circular/Terminal]

   Almost the same attribute, but Pilot Hunt (Circular dedicated)

[UCD]

[VM]

[RING]

   Pickup combined with any of this catacory follows above list

[PICKUP]


Canned Toll Exception Table

This entry is for Station Class 5,6 Toll check Table. This entry is divided into following

[ALLOW Table]

   - 10 bin no.

   - max 8 digits

[DENY Table]

   - 10 bin no.

   - max 8 digits


Toll Table

The Allow/Deny Tables are organized into 2 sets of tables to support 2 different toll plans at one installed site. Each allow table may contain up to 20 number strings and each deny table 10 number strings. All bins of allow and deny tables have no entries by default. Each number string can contain up to 8 numbers including any number 0-9, *, #, "Don't care".

The following rules should be remembered when setting up the

Allow/Deny Tables:

(1) If the tables have no entries, no restriction is applied.

(2) If entries are made in the allow table and only there, then only those numbers are allowed.

(3) If entries are made in the deny table and only there, then only those numbers are denied.

(4) If there are entries in both tables, the allow table is searched first and if number is found, it is allowed. If not found, the deny table is searched and if number is found, it is denied If it is not found in either table, it is allowed.